What details should small four-wheel drive rough terrain forklift pay attention to during running in? Loading, unloading and handling operations are indispensable in construction projects. It is too inefficient to handle materials only by manpower, and the labor intensity of personnel is high. Therefore, small rough terrain forklifts came into being.

What details should small four-wheel drive rough terrain forklift pay attention to during running in?

Matters needing attention during running-in period of Kaystar Pioneer40 forklift
What details should small four-wheel drive rough terrain forklift pay attention to during running in?

Loading, unloading and handling operations are indispensable in construction projects. It is too inefficient to handle materials only by manpower, and the labor intensity of personnel is high. Therefore, small rough terrain forklifts came into being.

The small rough terrain forklift has a small body and fast working speed. It can be seen in large and small construction sites. When we get a new machine, there must be a running in period. The use of the machine during this period determines the future use of the machine. Therefore, we should pay attention to these details during the running in period:

1.Before using the machine, carefully read the instructions of the off-road forklift and pay attention to each notice in the instructions.

2.During running in, the running in of forward gear and reverse gear shall be evenly arranged for each gear. During the running in period, the loading weight shall not exceed 70% of the rated load.

3.Pay attention to the lubrication of the machine and replace or add lubricating oil at the specified time.

4.Always pay attention to the temperature of the gearbox, torque converter, front and rear axles, wheel hub and brake drum. If there is overheating, find out the cause and eliminate it.

5.During running in, it is better to use light materials and do not operate too fast.

6.Check the temperature and connection of each component of the electrical system, the power supply status of the generator, lighting and other working conditions.

7.Comprehensively check the fastening of bolts and nuts of several key components of the forklift (engine, axle, gearbox, wheel, transmission shaft, etc.).

8.After the running in period expires, clean the filter screen of transmission oil pan and replace it with new oil; And change the engine oil and drive shaft gear oil.

Kaystar-Professional rough terrain forklift manufacturer

What needs to be replaced for forklift maintenance?